User manual

Audio Analyzer
4-66
AM700 Audio Measurement Set User Manual
Touch the Settled soft key in the Configure Measurements Setup screen to display
the Settled Data Point Detection Controls (see Figure 4-27). In this display are the
controls for defining a settled data point to the Audio Analyzer. You can select the
settling mode, the minimum settling level, the amount of delay time for a data
sample to settle before it is accepted, and the amount of time to wait for a sample to
be acquired. You can also define data sample variation and the number of raw data
samples that will be acquired for each settled data point. This screen consists of
Controls, Tolerance, and Resolution sections.
NOTE. The settings for all of the controls in the Settled menu are global and need
only to be set one time for it to be effective in all four measurements.
Figure 4-27: Settled data point detection controls display