User manual

Audio Analyzer
AM700 Audio Measurement Set User Manual
4-73
Figure 4-31: Relative to Reference setup menu
Touch Enter or Done to save the file name and exit the keyboard. Touch Select to
exit the Select Reference screen; this selects the file name. You can touch Save to
File to store an acquired reference trace to the selected file. The front trace in the
active window will be used as the reference trace when there is more than one trace
in a view (history traces or dual-trace displays).
Load a Ref From a File. To load a previously saved reference trace from a file, press
the Configure button and touch the Measurement Setup selection. In the Measure-
ment Configuration menu, Touch the Rel To Ref selection to display the Relative to
Reference controls. Specify the file name to use for the reference using the Select
Reference file system File Browser. Touch Load From File to restore the reference
trace data from that file. The file information appears over the Filename touch
space. The loaded reference trace must be appropriate for the measurement trace to
be available for use.