User manual

Audio Analyzer
4-74
AM700 Audio Measurement Set User Manual
NOTE. A reference trace is not displayed for comparison. The plot of new data shows
the difference between the reference trace and the new data.
To exit the Rel to Ref control screen and save the changes, touch the Accept
Changes soft key.
In setting up a measurement view you can select a view type (graphical or table) and
select the one of the available measurement traces to display in a view. There are
also several option selections for axis scaling and waveform plotting.
View Type. You can change the measurement display from a graphical to a table view
of the measurement data. To do so, press the Configure button and touch the View
Setup soft key to display the View Setup menu. In the View Types box, select Table
as the display mode; then touch the Accept Changes (or Cancel) soft key to exit and
return to the main Audio Analyzer display.
Besides allowing you to select the type of view (plot or table) for each of the four
views, the View Setup menu also lets you select which of the available measure-
ments traces are put in the view. (The available measurement traces are the
measurements that are enabled in the General screen of the Configure Measure-
ments menu.)
View Options. Each view also has associated options that you can specify. Touching
the View Options soft key in the View Setup screen displays the view options.
Options include logarithmic or linear display axes, type of waveform display (lines,
points, or both), and cursor behavior (these are a subset of the cursor controls that
are accessible when you press the Cursors button).
NOTE. Touching the View Setup icon (in the Audio Analyzer main display) is a more
direct way of accessing the settings that are displayed when you press the Configure
button and touch the View Setup soft key.
View Setup