User manual

Audio Analyzer
4-80
AM700 Audio Measurement Set User Manual
Cursors
Cursors can be used to select measurement points in a waveform. Cursor position is
adjusted using the Control Knob with cursor positioning active. The cursors can be
used to provide a continuous readout of the amplitude and frequency at the cursor
position.
Pressing the Cursors button places two cursors on the display and lets you position
them to mark display features. The numerical display shows frequency and level at
each cursor’s location and the timing difference between the two cursors. Refer to
Cursors on page 2-10 for more details on cursor operation.
Generator Status Readout
The generator status window is available in all measurement applications. When the
generator status readout is selected, the generator settings are displayed in the
viewing area. The size and position of the generator status readout changes to
accommodate graphical displays when they are also selected for viewing. Refer to
From the Generator Status Panel on page 4-15 for more information on the
generator status window.