User manual

Audio Monitor
4-102
AM700 Audio Measurement Set User Manual
Figure 4-52: Use of Cursors to measure pulse time
Pressing the Cursors button places two cursors on the display and lets you position
them to mark display features. The numerical display shows frequency and level at
each cursor location and the timing difference between the two cursors. Refer to
Cursors on page 2-10 for more details on cursor operation.
The difference readouts (both amplitude and time) shown are based on the position
of cursor 1 (the solid cursor) minus the position of cursor 2 (the dashed cursor).
Time readouts on the individual cursors are with respect to 0 time at the trigger
point of the record.
NOTE. When cursors are viewed on a dual y-axis display, they are associated only
with the front trace. The amplitude readouts accompanying the cursors reflect the
amplitude at the cursor positions in the front trace.