User manual

Function Operation
AM700 Audio Measurement Set User Manual
4-133
Figure 4-71: Storage Manager control screen
Copying a File. Copying a file from a floppy disk into the nvram function file is also
done using the Storage Manager control screen also shown in Figure 4-71.
1. Touch Drive on the right side of the Storage Manager screen to select the
nvram:.
2. On the right side of the Storage Manager screen select the function directory.
This done by first touching the directory name to shift the knob focus to that
side. Once the focus is shifted, you can use the large knob to make further
selections by scrolling through the list.
3. With the function/ directory highlighted, touch the Change Directory soft key to
go into that directory. You will then see a list of files if any are stored there.
4. Insert the floppy disk with function files you want to transfer into the disk drive.