User manual

Appendix A: Specifications
AM700 Audio Measurement Set User Manual
A-3
Table A-1: Analog Analyzer Specifications (Cont.)
Capabilities Description
Input Characteristics
Crosstalk +Noise, Channel-to-Channel
This is a wideband measurement of the level differ-
ence between the undriven channel and the driven
channel.
Both Channel Input Ranges Set to +8 dBu
High Resolution Mode
15 Hz to 20 kHz
Driven channel input is a +8 dBu sine wave.
Undriven input terminated in 600 Ω.
–88 dB, typically –100 dB (noise-limited);
Typically –100 dB at full scale on the +2, +8,
+14, +20, and +26 dBu ranges from 10 Hz to
20 kHz
High Bandwidth Mode
70 Hz to 80 kHz –65 dB, typically –70 dB (noise-limited)
Crosstalk +Noise, Channel-to-Channel (cont.)
Undriven Channel Set to Autorange
(Set driven channel input range to FS value indi-
cated below.)
High Resolution Mode
15 Hz to 20 kHz
Input (FS)
+8 dBu
+14 dBu
+20 dBu
High Bandwidth Mode
70 Hz to 80 kHz
Input (FS)
+8 dBu
–100 dB, typically –115 dB (noise-limited)
Typically–120 dB
Typically–125 dB
–95 dB, typically–100 dB, 70 Hz to 40 kHz
(noise-limited)