User manual

Index
Index-4
AM700 Audio Measurement Set User Manual
Digital Sample Rates, 4-24
Digital Sampling Rate, external device, 2-41
Digital sound, 2-27
Digital User Bits, 4-26
Digital Word, bit size, 4-112
Digital Word Size, 4-25
Digital XLR (rear panel), output voltage,
4-123
digitizing oscilloscope, 2-15
Display, icons, 2-4
Display button, 2-19
Display objects, 2-2
Display Type, Audio Analyzer, 4-74
Displays, graphical, 2-6
Distortion Reduction, Analog Generator,
4-32
Dither Type, 4-33, 4-123
DOS floppy disk drive, 4-132
DSP Digital Generator, 4-14
DSP port
sampling rates, 4-14
use of, 4-14
DSP Port connector, 2-41
dual-trace, trace switching, 2-24
Dwell, sweep, 4-21
Dwell Timing, Auto, 4-21
E
Edit Generator List, 4-22
embedded clock, digital audio signal, 4-107
Enabling a Generator Output, 4-14
Epson, 3-14
Equalization, Jitter Spectrum Measurement,
4-125
Exiting menus, 3-10
Expand, select, 2-24
Expand button, 2-23
expansion point, 2-24
external keyboard, 2-38
External trigger, use to determine phase
difference, 4-105
External Trigger Input, 2-37
External VGA monitor, 2-38
Eye Diagram, Digital Interface Tester, 4-116
Eye Diagram display, Digital Interface
Tester, 4-108
Eye/Jitter Detection
Jitter Gain, 4-125
JItter Spectrum, Equalization, 4-125
LF Rejection
  
  
F
factory default settings, 2-18
FFT, multitone measurement mode, 2-16
FFT Analysis Mode, FFT Analyzer, 4-85
FFT Analyzer, 2-16
Averaging, 4-89
BH4 (Blackman–Harris) Window, 4-83
bin resolution, 4-89
Capabilities, 4-82
Cursors, 4-88
Displays, 4-85
FFT Analysis, 4-81
Flat–top Window, 4-82
Hann Window, 4-82
Input Gain, 4-87
Kaiser–Bessel Window, 4-83
Measurement Bandwidth, 4-82
Measurement Modes, 4-85
Multitone Measurement mode, 4-90
Saramaki–Rajan Window, 4-83
Uniform Window, 4-82
User Window, 4-84
Windowing, 4-82
Zooming the Display, 4-89
FFT Analyzer button, 2-16