User manual

Introduction and Installation
1-8
AM700 Audio Measurement Set User Manual
The AM700 is shipped from the factory with its touch screen fully calibrated.
Although it will seldom be necessary, the touch screen can easily be recalibrated.
To calibrate the touch screen:
H Press the front-panel button labeled “Other.”
H Use the large control knob to scroll through the menu choices and select the
touch screen calibration choice from the menu that appears (see Figure 1-2).
Press Enter on the keypad to activate the selection.
The choice can be made by touching the selection directly on the touch screen
interface. However, the above procedure may be used if the touch screen becomes
uncalibrated.
Figure 1-2: Application selection menu under the Other button
Calibrating
the Touch
Screen