User manual

Introduction and Installation
1-10
AM700 Audio Measurement Set User Manual
H Press any application front-panel button to exit the paint screen and start the
application.
The AM700 has a system clock with an internal backup battery. After setting for
your local time, it is ready to use. Performing this exercise for the first time will also
introduce you to the Configure menus that you will use as you set up the AM700. To
set the clock use the following procedure:
1. Press the Configure button on the front panel. This displays the choices for
configuring the various user selections of the AM700. Clock setting is done in
the System Setup option.
Figure 1-4: AM700 System Clock
2. Touch “System Setup” to display the choices under that option. Clock is the
default selection, and the clock face appears as seen in Figure 1-4.
Setting the
AM700 Clock