User manual

Operating Basics
AM700 Audio Measurement Set User Manual
2-11
Pressing and holding the Cursor button brings up the Cursor menu as shown in
Figure 2-8. The menu controls permit you to select cursors and employ some special
positioning actions.
Figure 2-8: Cursor menu showing frequency and level readouts
Next Cursor. Next Cursor toggles the active cursor selection between the two cursors.
Cursor 1 is indicated as a solid vertical line; cursor 2 is indicated as a dashed
vertical line. The active cursor is brightened. You can position the active cursor by
rotating the large control knob or by touching it and dragging it to a new position.
Join Cursors. Join Cursors moves the two cursors together so that the starting
positions of the cursor can be quickly set. If one cursor is active, the other will move
to meet it. If neither is selected, they will both be centered in the display. You will
typically use this selection when first bringing up the cursors to help you find them
since it places both cursors together.