User manual

Operating Basics
AM700 Audio Measurement Set User Manual
2-13
With the Average menu displayed, touch the Avg Count soft key to activate the field
editor and either use the control knob to adjust the number or use the numeric
keypad to enter a new average count number. The Avg Count can be set for 1 to
9,999 averages.
Touch the Processing soft key and turn the control knob to specify averaging or
holding minimum or maximum signal values. Touch the Processing soft key to
accept the change. With Hold Maximum or Hold Minimum is selected, the Avg
Count soft key is not accessible.
Press Clear Menu to exit the Average menu.
Figure 2-9: Average menu and FFT trace with averaging applied
The Clear Menu button removes configuration screens, menus, and dialog boxes
from the display when they are no longer needed.
Clear Menu