User manual

Operating Basics
AM700 Audio Measurement Set User Manual
2-21
Figure 2-14: File renaming keyboard
Pressing the Copy button sends a copy of the display in the selected format to the
print spooler (temporary memory space) where it is queued for printing. The LED in
the Copy button flashes as long as the copy remains in the spooler.
To select the output format for a copy, you must use the menu selections for Copy
found in the Configure menu under System Setup. Refer to System Copy on
page 3-13 for information on setting up the Copy choices.
NOTE. Pressing and holding the Copy button immediately brings up the Configure
menu, with the System Setup choices for Copy displayed. This is the same screen
that is displayed by pressing the Configure button, and touching the System Setup
soft key.
Copy