User manual

Configuring the AM700
3-6
AM700 Audio Measurement Set User Manual
Pull-down
Input Selection
Menu. Use the large
knob to move the
selection box to the
signal you want.
Touch the measurement
channel soft key to display
the pull-down menu.
Touch the measurement
channel soft key a second
time to assign the input to
the channel and clear the
pull-down menu.
Use the quick select
soft keys to set both
channels to the same
generator type.
Figure 3-5: Measurement channel assignment pull-down menu
If you want to use the digital generator or the digital reference signal as inputs to the
measurement channels, select the appropriate one instead of the analog high
bandwidth or analog high resolution route. The most common selections (and the
default connections) are the Analog A high resolution input connected to measure-
ment Channel 1 and the Analog B high resolution input connected to measurement
Channel 2.
When you finish making your selections, press the Clear Menu button to exit the
Input Selections menu.