User manual

Configuring the AM700
3-8
AM700 Audio Measurement Set User Manual
For each type of view, the AM700 also offers options that allow you to configure the
display for your viewing requirements. You can configure the display in the View
Setup menu (see Figure 3-6).
To select a view type and define the view options:
1. Press the Configure button and touch the View Setup soft key to enter the View
Setup menu.
2. Select the desired view type by touching the icon on the display.
3. If desired, touch the View Options icon to display available options for the view
you have selected.
4. Select the desired view options (a checked box indicates that an option is
selected).
5. Save your selections and return to the main display by touching the Accept
Changes soft key or cancel your changes and return to the main display by
touching the Cancel soft key.
View Types. The View Types column in the View Setup menu shows the icons for
these view types. Each view can be a different view type. Selecting a particular
view type is done by first selecting the view you want to change in the View
Selection bar. Only the selected view is affected by a change in the choices. The
Measurement column shows the measurement types that are available for viewing in
a view window. Altering those choices is done in the Measurements Setup menu that
is discussed on page 3-11.