User manual

Configuring the AM700
AM700 Audio Measurement Set User Manual
3-9
You can set up a view to display FFT measurements or Multitone measurements but
not both. The View Types that are available also depend on the measurement
selected, since they are different for FFT and Multitone. The applicable choices will
be displayed for the Measurement Type selected for a view. Notice that both FFT
traces can be displayed in the same view window. Refer to FFT Analyzer on
page 4-81, for more information about the FFT application.
View Options. The View Options menu permits selection of axis types, display
persistence, and cursor actions as shown in Figure 3-7. When a choice is selected
(by touching the enabling soft key), a check mark appears in the soft key to show
that the choice is enabled. Touch the enabling soft key again to unselect the choice.
This removes the check mark and returns to the alternate choice.
Figure 3-7: FFT Analyzer View Options in the View Setup controls