Owner's Manual

Fixing the Bronze FX to a wall
CAUTION: You will need to determine where the Bronze FX’s will be xed and the structure of the
wall. For safety reasons, if you are unsure of your ability to provide a secure and safe xing, do not
attempt to x these speakers to your wall, please obtain the services of a competent and qualied
trades person.
CAUTION: Ensure that there are no water pipes or electricity cables running behind where the wall
brackets are going to be secured. Work from secure steps and avoid trailing wires.
We do not supply wall xing screws and plugs with the Bronze FX. Please use suitable xings for
the type of wall construction the Bronze FX’s will be xed to.
To assist in xing the Bronze FX’s to the wall, we would recommend using the wall xing template enclosed
within the packaging carton.
Connecting Speaker Cables
Bare Wire Connection
Unscrew the binding posts and pass the bare wire through the through-hole. Tighten the binding post to
clamp the wire in place.
Banana Plugs
Remove the red and black plastic plugs from the terminals and insert the banana plugs into the standard
4mm holes that are revealed. Pliers may be required to gain purchase on the plugs.
monitoraudio.com 7
ENGLISH