Owner's Manual

Bronze Series8
Wiring
Single Wiring
Connect a single set of cables to the terminals on the back of your speaker. It is perfectly acceptable
to connect to the top, bottom terminals or even diagonally (experimentation is advisable to achieve the
preferred results).
NOTE: When using this method you must KEEP the terminal links in place.
Bi-Wiring
This method can be carried out with the Bronze 2, 5 and 6 speakers. Connect two sets of cables to the top
and bottom terminals (positive to positive and negative to negative) from single output of your amplier.
NOTE: When using this method the terminal links MUST be REMOVED.
Bi-Amping
This method can be carried out with the Bronze Series 2, 5 and 6 speakers. Connect a set of cables to the top
terminals from one amplier and the bottom set on the second amplier.
NOTE: When wiring this method the terminal links MUST be REMOVED.
LEFT
+
-
RIGHT
AMP
+
-
LEFT
+
-
RIGHT
AMP
+
-
LEFT
+
-
RIGHT
AMP
+
-
LEFT
+
-
RIGHT
AMP
+
-