Specifications

Detailed Description - New Features
141
System Flags
The ENABLE_IP_REDIAL System Flag is overridden by the Auto Redialing setting in
the Conference Profile.
Auto Redialing is controlled by the two System Flags described in Table 11.
If a flag is not listed in the System Flags list it must be added to the system.cfg file before
it can be modified.
To list, modify or add flags to the system.cfg file:
1 In the RMX Web Client menu, click Setup>System Configuration.
The System Flags list is displayed.
2 For each of the flags:
If the flag is listed:
a In the System Flags dialog box, click the Edit Flag button.
b Enter the New Value for the flag.
c Click the OK button.
If the flag is not listed:
a In the System Flags dialog box, click the New Flag button.
b Add the New Flag and Value as set out in Table 11.
c Click the OK button.
3 Click the OK button.
Table 11 System Flags – Auto Redialing
New Flag Description
REDIAL_INTERVAL
_IN_SECONDS
Enter the number of seconds that the RMX should wait
before successive redialing attempts.
Range: 0-30 (Default: 10)
NUMBER_OF 
_REDIAL
Enter the number redialing attempts required. Dialing may
continue until the conference is terminated.
Default: 3