Specifications

RMX 1500/2000/4000 Release Notes for Maximum Security Environments - Version 7.5.0.J
10
4 General IVR Service The DTMF Codes of the Roll Call actions
defined in the default IVR Services shipped
with new RMX systems were changed as
follows:
• Enable Roll Call: old: *32 new: *42
• Disable Roll Call: old: #32 new: #42
• Roll Call Review Names: old: *33
new: *43
• Roll Call Stop Review: old: #33
new: #43
5 IVR Service The DTMF Codes of the Recording actions
defined in the default IVR Services shipped
with new RMX systems were changed as
follows:
• Start/Resume Recording: old: *73
new:
*3
• Stop Recording: old: *74 new: *2
• Pause Recording: old: *75 new: *1
Note: Recording is not supported in Ultra
Secure Mode.
6 Multilingual Support Site names can now be displayed in
Kazakh fonts.
7 System Configuration
Flag
The flag: ITP_CROPPING was added to
determine the automatic cropping
performed by the system when adjusting
the display aspect ratio from 9:16 to 3:4
and vice versa in Telepresence (ITP)
conferences.
The following values can be defined:
• ITP (default) - When a Telepresence
(ITP) conference is detected, the image
will not be cropped on the sides, but
either black strips will be added to the
top and bottom (when adjusting the
aspect ratio from 9:16 to 3:4) or strips
will be cropped from the top and the
bottom at a ratio of 84%:16% (for 3:4 to
9:16 ratio adjustment). This setting is
compatible with system behavior in
previous versions.
• CP - cropping is performed equally
from top and bottom or from the sides
(depending on the required ratio
adjustment), as done in
non-telepresence conferences (CP
conferences).
• MIXED - cropping is performed equally
from the sides of the picture (as in CP
mode) and 84%/16% from top and
bottom as in ITP mode, depending on
the required ratio adjustment.
Table 6 Changes to Existing Features (Continued)
Category Feature Name Description