Specifications

RMX 1500/2000/4000 Release Notes for Maximum Security Environments - Version 7.5.0.J
174
11 Content VNGR-
12225
In a conference running at
a line rate of 768 Kbps with
HDX endpoints connected
and Content that is set to
Graphics is sent or VSX
endpoint connects the line
rate decrease to 512 Kbps
and does not increase
back to 768 Kbps when
Content is halted or the
VSX endpoint disconnects.
V5.0.0
12 Content VNGR-
12342
When adding two or more
Legacy endpoints to an
ongoing conference,
ViewStation endpoints do
not revert back to
Conference Layout after
content sharing is halted.
V4.1
13 Content VNGR-
13465
An assert occurs when
sending Content from a
VSX 3000 endpoint to a
conference that includes a
recording link and MOC
(SIP URI), HDX SIP, VSX
3000 H323 are connecting
to it.
V6.0
14 Content VNGR-
14791
Artifacts can be seen
around the layout lines and
site names when endpoints
(HDX 8000,HDX
9004,HDX
4000.CMAD,PSTN)
connect to a conference
running on an RMX in
MPM mode, at a line rate
of 512 Kbps and Content is
sent to all endpoints.
V6.0
15 Diagnostics VNGR-
16893
On an RMX2000 with MPM
cards, when implementing
the Diagnostic mode the
MPM card status remains
in a "startup" phase.
V7.0
16 Diagnostics VNGR-
16633
On an RMX 2000/4000
when accessing the
Diagnostic mode and
clicking the "run all tests"
option, the confirmation
window only appears
minimized in the Windows
Toolbar at the bottom of
the screen.
V7.0
Table 6 Corrections Between Version 5.1.0.G and Version 7.5.0.J (Continued)
# Category Key Description
Detected
in Version
Workaroun
d