Specifications

Table Of Contents
Corrections and Known Limitations
181
61 Hardware VNGR-
16882
On an RMX 1500 in the
Diagnostic mode, when
viewing the MCU Monitor
section, the card slot
numbering is incorrect.
V7.0
62 Hardware VNGR-
16166
On an RMX 2000 with two
MPM+ cards, after several
minutes participants could
not connect due to MCU
Internal Problem 32112.
V7.0
63 Hardware VNGR-
15801
After upgrading RMX4000,
an error message appears:
"No RTM-LAN or
RTM-ISDN installed" on
slots13, 14, 15". In fact no
RTM-ISDN card is installed
in slot 13.
V7.0
64 Hardware VNGR-
12059
After upgrading to build
version 5.0.0.21, the
temperature on the card
reached Major and
required attention.
V5.0.0
65 Interoperability VNGR-
16647
On an RMX 2000 in a
384Kbps H.323 CP
conference with Sharpness
and LPR enabled, when
the RMX dials-out to an
Tandberg 6000E, an empty
video frame appears.
V7.0
66 Interoperability VNGR-
16723
On an RMX 1500 running
an mixed (H.323, SIP &
ISDN) 1024Kbps
conference, after
connecting the ISDN
endpoint and changing the
layout, after a few minutes
the ISDN endpoint views a
black screen and the video
frame rate is 0.
V7.0
67 Interoperability VNGR-
16829
Blurred and highly color
saturated video, followed
by a black screen is
displayed on HDX ISDN
endpoint connected to
RMX 2000 with MPMx at
1152kbps.
V7.0
Table 6 Corrections Between Version 5.1.0.G and Version 7.5.0.J (Continued)
# Category Key Description
Detected
in Version
Workaroun
d