Specifications

Corrections and Known Limitations
185
91 IVR VNGR-
15663
An IVR slide with1080p
resolution was uploaded
successfully to the RMX
but cannot be viewed with
the preview button nor
could be seen in the IVR
welcome slide.
V7.0
92 IVR VNGR-
10824
In a SIP CP conference
with a line rate of 2 Mb,
HDX 8006 endpoints
cannot view the IVR slide.
V4.1
93 IVR VNGR-
11773
On rare occasions, the IVR
audio message may be
played at a higher speed
than normal.
V4.1.1
94 IVR VNGR-
12021
A conference running at a
line rate of 1920Kbpsand
IVR Service that includes a
Welcome Slide, both the
Welcome Slide and Video
are partially blacked out.
V5.0.0
95 IVR VNGR-
9191
When DTMF codes have
been entered by the
participants, the volume of
the IVR Message may be
suppressed or the
message may be cut.
V4.0.0
96 IVR-RMX 4000 VNGR-
16548
On the RMX 4000 & MPMx
card, when running an
4MB CP conference, the
Welcome slide does not
appear.
V7.0
97 IVR-RMX 4000 VNGR-
12283
On the RMX 4000, when
dialing from ISDN endpoint
to GW, the IVR Welcome
message is cut off.
V5.0.0
98 IVR-RMX 4000 VNGR-
12508
When an endpoint
connects to a Meeting
Room on the RMX4000,
the RMX2000 Welcome
slide is displayed.
V5.0.0
99 IVR-RMX 4000 VNGR-
19175
On an RMX 4000 in the
Ultra Secure Mode, when a
dial-out conference is
started from a Profile and
the IVR initiates, audio and
video problems occur.
7.5
Table 6 Corrections Between Version 5.1.0.G and Version 7.5.0.J (Continued)
# Category Key Description
Detected
in Version
Workaroun
d