Specifications

Table Of Contents
Corrections and Known Limitations
189
121 SIP VNGR-
17732
In ICE environment, if QoS
is enabled in the IP
Network Service, the
connection to the OCS is
broken and the RMX
cannot provision ICE and
cannot see the connection
to the edge server.
V7.0/7.0.1
122 SIP VNGR-
12136
No video or low quality
video is seen by a SIP
HDX endpoint that
connects to a conference
set to 384 Kbps at much
higher line rate, such as
4Mb.
V4.6
123 SIP VNGR-
15954
After creating a new SIP
Factory and then deleting
it, you cannot create
another new SIP factory. A
message alert appears:
"fail to add SIP factory.”
V7.0
124 SIP VNGR-
11971
When trying to connect SIP
participants via an external
API application, when the
URI and IP address fields
are switched (the IP
address is left empty and
the URI is set to the IP
address), the endpoint will
disconnect.
V5.0.0 Set the IP
address
correctly.
125 SIP VNGR-
12017
Occasionally, when a
dial-in SIP participant
accesses the Entry Queue,
the participant connection
fails even though the
participant entered the
correct conference ID.
V5.0.0
126 Software
Version
VNGR-
16803
On RMX 1500 with MPMx
High System CPU Usage
fault occurs.
V7.0
127 Software
Version
VNGR-
16818
On RMX 2000 with MPM,
after upgrading the RMX
restarted with "no utilizable
unit for audio controller"
requiring hard reset (switch
off and then on).
V7.0
Table 6 Corrections Between Version 5.1.0.G and Version 7.5.0.J (Continued)
# Category Key Description
Detected
in Version
Workaroun
d