Specifications

RMX 1500/2000/4000 Release Notes for Maximum Security Environments - Version 7.5.0.J
12
13 General
(cont.)
System Configuration
Flag
The flag ITP_CERTIFICATION was added
to the system configuration.
When set to NO (default), disables the
telepresence features in the Conference
Profile.
Set the flag to YES to enable the
telepresence features in the Conference
Profile (provided that the appropriate
License is installed).
14 System Configuration
Flag
The H323_RAS_IPV6 was added tot the
system configuration. When IPv4 & IPv6
addressing is selected, RAS (Registration,
Admission, and Status) messages are sent
in both IPv4 and IPv6 format. If the
gatekeeper cannot operate in IPv6
addressing mode, registration fails and
endpoints cannot connect using the RMX
prefix.
In such cases this System Flag should be
set to NO.
Default: YES
15 Video Telepresence Mode Control and monitoring of Immersive
Telepresence (ITP) features have been
enhanced with:
• Automatic detection of ITP sites.
• Retrieval of Telepresence Layout
Mode.
• Control of Cropping and Striping
options.
• Enhanced Layout control.
16 Limiting Maximum
Resolution
The Maximum Resolution settings of the
Resolution Configuration dialog box can be
overridden by new fields that have been
included in the New Profile and New
Participant dialog boxes.
17 Auto Layout Changes Two additional layouts are activated in
Auto Layout Mode when there are:
• 11 connected participants
• 12 or more connected participants
18 Auto Brightness Auto Brightness detects and automatically
adjusts the brightness of video windows
that are dimmer than other video windows
in the conference layout.
19 Video Switching
Resolutions
In addition to H.264 720p30, the following
Video Switching resolutions have been
added for MPM+ and MPMx cards only:
• H.264 1080p30
• H.264 720p60
• H.264 SD 30
Table 6 Changes to Existing Features (Continued)
Category Feature Name Description