Specifications

Table Of Contents
RMX 1500/2000/4000 Release Notes for Maximum Security Environments - Version 7.5.0.J
208
32
Content VNGR-
17729
Video freeze was
experienced by many
participants when content
was sent from a PC to 160
CIF participants connected
to a conference running on
RMX 2000 with MPM+80
at a line rate of 384kbps
and LPR and Encryption
options enabled.
V7.0.2
33
Diagnostics VNGR-
16142
On the RMX1500/2000
when running the
"Diagnostic - RTM ISDN",
test ID 717 RTM TDM
FALC1 Diag, the test fails.
Reason for the test failure:
"RTM Timeout - RTM didn't
send Test Completed".
V7.0
34
Diagnostics VNGR-
16742
On an RMX2000 with
MPMx_D cards when
performing an Power ON
Self Test (POST), the
MPMx card runs the card
monitoring test in an
endless loop.
V7.0
35
Diagnostics VNGR-
16754
On an RMX 4000 in the
Diagnostic mode when
pressing the menu reset
button the following
message appears:
"connection with shelf
management is lost,
please log in again". You
can only exit the
Diagnostic mode after
physically turning the RMX
Off and On.
V7.0
36
Diagnostics VNGR-
18257
Software verification failure
is indicated when running
diagnostics on RMX 1500
(MPMx card).
V7.0.2
37
Encryption VNGR-
11401
In an encrypted
conference, Tandberg
MXP endpoints encounter
audio problems.
V4.1
Table 8 Version 7.0.2 System Limitations
# Category Key Description
Detected
in Version
Workaround