Specifications

Table Of Contents
RMX 1500/2000/4000 Release Notes for Maximum Security Environments - Version 7.5.0.J
220
110
General VNGR-
17436
Unit recovery of unit 14,
board 1 occurred.
V7.0.1
111
General VNGR-
17496
DSP recovery and asserts
occur, endpoints are
disconnected or lose both
audio and video on
RMX4000 running
V7.0.1.16 with 4*MPM+80
cards.
V7.0.1
112
General VNGR-
17517
"Insufficient resources"
with "Power off problem"
errors occur when 15 HDX
8006 and 10 HDX 9004
that are connected to a
conference at a line rate of
4096kbps are muted and
unmuted individually and
then the conference layout
is changed.
V7.0.2
113
General VNGR-
17520
In MPMx Card
Configuration Mode, the
High Profile Sliders in the
Resolution Configuration
dialog box are set to the
minimum and do not show
the actual values for the
predefined Resolution
Configurations.
V7.0.2
114
General VNGR-
17587
Several participants are
deleted from a conference
template when editing the
conference template
name.
V7.0.2
115
General VNGR-
17714
Occasionally, RMX 4000
with MPM+ automatically
resets when running
conferences. The system
displays the Active Alarm:
NEW_VERSION_INSTALL
ED: A new version was
installed. Reset the MCU,
although a new version
was not installed.
V7.0.2
116
General VNGR-
17724
After Comprehensive
Restore to Factory
Defaults, an active alarm
displayed, indicating
voltage problem on MPM-f
- card.
V7.0.2
Table 8 Version 7.0.2 System Limitations
# Category Key Description
Detected
in Version
Workaround