Specifications

Table Of Contents
Corrections and Known Limitations
223
131
Hardware VNGR-
16785
Run 8 512Kbps
conferences and connect
to each conference 2
H.323, 2 SIP, 1 ISDN, 1
PSTN & 1 VOIP endpoints,
change the conference
layout on each, when
terminating the
conferences an "MCU
Internal Problem 50020"
occurred on the MPMx
cards.
V7.0
132
Hardware VNGR-
16936
On an RMX 4000 when
viewing the Signaling
Monitor window, the Active
Alarms pane shows no link
between Fabric Switch
Module and MPMx card in
slot 1.
V7.0
133
Hardware VNGR-
16945
On the RMX2000 and
RMX4000, when
performing diagnostics
using the Power on Self
Tests (POST) you cannot
access the Shelf Manager.
V7.0
134
Hardware VNGR-
17001
MPMx card remains in
startup mode instead of
Major state after restoring
the RMX to factory defaults
and without configuring the
IP address of the media
card(s) in the Fast
Configuration Wizard.
V7.0.1
135
Hardware VNGR-
17157
DSP did not automatically
recover after failure.
V7.0.1
136
Hardware VNGR-
17194
Board recovery failure
occurs after all units on
board 2 stop sending data
after 3 recovery attempts
on RMX2000 running
V7.0.0.162 with MPMx
cards.
V7.0
137
Hardware VNGR-
17851
Sometimes connection
with RTM ISDN is lost.
V7.0.2
138
Hardware VNGR-
17869
When inserting a Control
Unit in Slot 4, in Hardware
Monitor it is shown as
inserted in slot 3
V7.0.2
Table 8 Version 7.0.2 System Limitations
# Category Key Description
Detected
in Version
Workaround