Specifications

RMX 1500/2000/4000 Release Notes for Maximum Security Environments - Version 7.5.0.J
44
Operating Mode Selection During Startup / Restart
• When started with Version 7.0.x installed, the RMX enters MPMx Mode by default
when no media cards are installed.
System Information Changes
The System Information includes License Information, and general system information,
such as system memory size and Media Card Configuration Mode, which in version 7.0.x
includes the MPMx Mode.
Table 10 summarizes the Operating Mode After Next Restart resulting from of adding or
swapping MPM+/MPMx cards in a running system .
Example:
Current status
An RMX has MPM+ card installed.
The Card Configuration Mode is MPM+.
and the MPM+ card is enabled.
Action
• Insert one MPMx card.
Result
•The Card Configuration Mode remains MPM+.
• MPM+ card is enabled.
•The inserted MPMx card is disabled.
After Reset
The Card Configuration Mode is MPMx.
The inserted MPMx card is enabled.
The remaining MPM+ card (if not removed) is disabled.
• The RMX switches between MPMx and MPM+ Card Configuration Modes
when MPM+/MPMx cards are removed or swapped while the system is
running.
• The switch between Card Configuration Modes occurs during the next
restart.
• Installing or swapping MPM+/MPMx cards while the system is off will not
cause a switch in the Card Configuration Mode when the system is restarted
– it will restart in the Card Configuration Mode that was active previous to
powering down.
Table 10 RMX Card Configuration Mode After Next Restart
Current
Operating
Mode
Media
Cards
Installed
Card(s)
Supported
Card(s)
Disabled
Operating
Mode After
Next Restart
MPMx
MPM+ None All MPM+
MPM+ and
MPMx
MPMx Only MPM+ MPMx
MPM+
MPM+ All None MPM+
MPM+ and
MPMx
MPM+ Only MPMx MPMx