Specifications

Table Of Contents
Detailed Description - New Security Features
87
The following System Flags must be set to NO:
MULTIPLE_SERVICES
ENABLE_EPC (If this System Flag doesn’t exist it must be created.)
•If Content is to be shared the conference Profile should have Content Protocol set
to H.263.
When the RMX is in Ultra Secure Mode, it requires that the Serial Gateway be in
Maximum Security Mode. For more information see the RMX 1500/2000/4000
Deployment Guide for Maximum Security Environments,
"Serial Gateway S4GW -
Maximum Security Mode” on page 5-11.
H.323 connections to the RMX are 1024-bit encrypted TLS.
RTP traffic between the RMX and the Serial Gateway are not encrypted.
•The Certificate installed on the Serial Gateway must be also be installed in the
workstation that is used to run the RMX Web Client / RMX Manager.
Table 1-1 summarizes the LAN port connections for each of the RMX platforms.
When using a HDX endpoint, it should be configured as follows:
Table 1-1 LAN Port Connections per RMX Platform
RMX Management Signaling Media
V.35 Serial
Gateway
Direct
Connection
1500 MNG B MNG LAN 2 LAN 1
2000
RTM IP
LAN 3
RTM IP
LAN 2
RTM IP
LAN 2
RTM LAN
LAN 1
4000
RTM IP
LAN 2
RTM IP
LAN 3
RTM LAN
LAN 2
RTM LAN
LAN 1