User manual

- 23 -
12.4.2 Front connector
This DB25 connector is for the DUAL ANALOG I/O breakout cable, as shown in the following drawing.
ANALOG IN 1 - 4
Any professional level balanced audio output can be connected to the analog line inputs of the DUAL Daughter card. Input levels are
selectable from consumer level (–10 dBV) up to professional level (+4 dBu).
ANALOG OUT 1 - 4
Any professional level balanced audio input can be connected to the analog line outputs of the DUAL Daughter card. Output levels
are selectable from consumer level (–10 dBV) up to professional level (+4 dBu).
12.4.3 Rear 0 connector
This DB25 connector is for the DUAL AES/EBU I/O breakout cable, as shown in the following drawing.
AES/EBU IN 1/2 - 7/8
Any professional level balanced digital AES/EBU audio output sources at 32, 44.1 or 48 KHz can be connected to the AES/EBU
inputs of the DUAL Daughter card.
AES/EBU OUT 1/2 - 7/8
Any professional level balanced digital AES/EBU audio inputs at 32, 44.1 or 48 KHz can be connected to the AES/EBU outputs of
the DUAL Daughter card.
ANALOG I/O
ANALOG IN 3
ANALOG IN 2
ANALOG IN 1
ANALOG OUT 1
ANALOG OUT 2
ANALOG OUT 3
ANALOG OUT 4
ANALOG IN 4
AES/EBU I/O
AES/EBU IN 5/6
AES/EBU IN 3/4
AES/EBU IN 1/2
AES/EBU OUT 1/2
AES/EBU OUT 3/4
AES/EBU OUT 5/6
AES/EBU OUT 7/8
AES/EBU IN 7/8