User manual

- 27 -
13.3 Merging Technologies Pyramix 6.x DAW with Surround Monitoring
This example is based on a typical Pyramix analog/digital audio studio with both types of devices and a surround monitoring system.
This example shows the following connections:
• The Mic Preamp/Mixer outputs are routed through the analog inputs of the DUA II to Pyramix input channels 1-4 (ADAT)
• The DAT/Effect/CD-Player outputs are routed through the AES/EBU inputs of the DUA II to the Pyramix input channels 5-8
(ADAT)
• The Pyramix output channels 1-4 (ADAT) are routed through the analog outputs of the DUA II to the monitoring system.
(In this example: CH1 = Left / CH2 = Center / CH3 = Right / CH4 = Subwoofer)
• The Pyramix output channels 5-6 (ADAT) are routed through the monitor outputs of the DUA II to the monitoring system (In this
example: Left = Left Surround / Right = Right Surround)
• Pyramix output channels 7-8 (ADAT) are routed through AES/EBU outputs of DUA II to the DAT/Effect.
(In this example: It may be a simple Stereo Mix to be recorded on DAT, or a send for external effect)
• The DAT/Effect must use its AES/EBU input as its sync source.
• The DUA II is set to ODI sync mode, AutoDetect SR mode and OUT5/6 monitoring.
• The DIP switches 1-8 must be set to: X – X – X – X – OFF – ON – OFF – OFF.
MERGING Pyramix V5