User manual

- 29 -

14.2 Audio for Video with SONY® Analog BetaCam Users

This example is based on Video NLE & DAW users who are using the Mykerinos board in conjunction with the Sphynx Audio

Interface and an Analog BetaCam video deck.

IDEO

IGITAL

UDIO

ORKSTATION

This example shows the following connections:

• The monitoring is done by the front panel Monitoring selection &output or through the stereo monitoring connector of the

Mykerinos board.

• The Sphynx contains 2 analog input modules (4 inputs) and 2 analog output modules (4 outputs).

AES/EBU output modules are optional in this configuration.

• All units (The Mykerinos board via the TC card or breakout cable CVS1IN input, Video Deck and Sphynx) are connected to the

Video Sync generator.

Note that any composite video source can also be used as a Video Sync reference for the Sphynx.

• Note that the Video Loop output of the Sphynx can be used to supply the video reference to other devices. Otherwise, a 75-Ohms

terminator must be connected to the Loop output.

• The Sphynx is set to VIDEO Sync Mode