Contents Contents 1 Introduction 2 ASB-10 Capabilities 2 What’s in the box 2 The ASB-10 3 ASB-10 Connections 3 ASB-10 Buttons 3 Remote 4 Changing the Remote Battery 4 Connecting Audio Devices Via Digital Input 5 Connecting Analogue Audio Devices Via Coaxial Input 5 LED Colour Matrix 6 LED Flashing Patterns 6 Specifications 7 Owner Information 8 1
Introduction ASB-10 Capabilities • Fully active, high performance soundbar system • 5 discrete power amplifier stages - fully digital amp technology (class D) • Proprietary 3D spatial effects, consistent in quality irrespective of environment • Digital coaxial input (S/PDIF) • Digital optical input (Toslink) • Analogue stereo RCA inputs, 3.
The ASB-10 ASB-10 Connections Title: ASB-1 CONNECTOR PANEL DECAL ARTWORK V1 Date: 1st July 2014 1. Auxiliary Used to connect an analogue stereo audio source to the ASB-10 using a 3.5mm stereo mini jack connector (refer to page 8). 2. Mains Input Used to connect the ASB-10 to the mains (refer to page 9). SUB OUT 3 1 COAXIAL 3. Sub Out Used to connect the ASB-10 to an additional sub woofer (refer to page 8). 4.
Remote 1. Standby Used to put the ASB-10 in and out of stand by mode. 2. Volume Up Used to increase the volume of the ASB-10. 3. Previous Track Used to select the previous track of the audio source. 4. Volume Down Used to reduce the volume of the ASB-10. 5. Mute Used to mute the sound from the ASB-10. Pressing it again returns the volume to the previous level. 6. 3D Sound Used to change the sound of the ASB-10 to create a 3 dimensional effect (refer to page 16). 7.
Making the Connections Now the location has been decided, connect the sources to the ASB-10 ensuring that none of the cables are not kinked or stretched. NOTE: Do not connect the power to the ABS-1 until you have made all of your audio/ video connections. Connecting Audio Devices Via Digital Input You can connect the device to the ASB-10 using the Digital Optical or Digital Coaxial outputs from them.
LED Colour Matrix The table below shows the various colours and flash patterns associated with the front LED and their meanings. 1 . . . 2 . . . 3 . . . 4 . . .
Owner Information Product Details Model ASB-10 Product Serial No ………………………………….. Date of Purchase …………………………………… IP Address on Network …………………………………… MAC Address of ASB-10 …………………………………..… Dealer Details Dealer Name ………………………………………………………………………………. Address ……………………..……………………………………………………………… ........................................................................................................... Town ................................................................................................ Post code .
m o n i t o r a u d i o . c o . u k Monitor Audio Ltd. 24 Brook Road Rayleigh, Essex SS6 7XJ England Tel: +44 (0)1268 740580 Fax: +44 (0)1268 740589 Email: info@monitoraudio.co.uk Web: www.monitoraudio.com Designed and Engineered in the United Kingdom, made in China Version 1.
I m p or ta n t saf e t y i n s t r u c t i o n s GB - Safety Instructions FR - Consignes de sécurité IT - Istruzioni per la sicurezza DE - Sicherheitsanweisungen ES - Instrucciones de seguridad PT - Instruções de Segurança NL - VEILIGHEIDSINSTRUCTIES CH - 安全說明 RU - инструкции по технике безопасности RU - Условия гарантии ai r s t ream
ENGLISH WARNING • • • TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT AND FULLY INSERT.
Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 2 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus with water. Clean only with a dry cloth. Great care and attention has gone into the materials chosen to produce the product. A gentle wipe with a dry, clean cloth is all that is required to remove any dust. Treat it as you would a fine piece of furniture because that is how they have been designed.
Correct Disposal of Waste Electrical and Electronic Equipment (WEEE) by User in Private Households in the EU. This symbol on the product or accessories indicates that they must not be disposed of with your household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
Guarantee and Service Claims under this Guarantee To validate your warranty please visit www.monitoraudio.co.uk within 30 days of purchase. The equipment should be returned in its original packaging to the original supplier where possible, or to any other authorised Monitor Audio dealer. If it is not possible to return the equipment by hand, then it should be sent carriage prepaid via a reputable carrier. If the original packing is not available replacement packaging can be purchased from Monitor Audio.
We, Monitor Audio Ltd. 24 Brook Road Rayleigh Essex SS6 7XJ England ENGLISH EC Declaration of Conformity EN6100-3-3: 01.95 Electro magnetic compatibility (EMC) – Part 3: Limits – Section 3: Limits of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current up and including 16 Ampere per phase.
CONS I GNES DE S É CUR I T É I MPORTANTES ai r s t ream 6 Important Safety Instructions
• • • POUR EVITER UN INCENDIE OU UNE ELECTROCUTION, EVITEZ DE BRANCHER CETTE PRISE SUR UNE RALLONGE, UNE AUTRE PRISE OU UNE PRISE MURALE SI LES BROCHES NE SONT PAS ENTIEREMENT INSEREES. POUR EVITER UN INCENDIE OU UNE ELECTROCUTION, EVITEZ D’EXPOSER CET APPAREIL A LA PLUIE OU A UNE ATMOSPHERE HUMIDE POUR EVITER UNE ELECTROCUTION, POSITIONNEZ LA GRANDE BROCHE BIEN EN FACE DE L’ENCOCHE LA PLUS GRANDE ET INSEREZ-LA ENTIEREMENT.
CONSIGNES DE SÉCURITÉ IMPORTANTES 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 8 Veuillez lire ces consignes. Veuillez conserver ces consignes. Veuillez tenir compte de tous les avertissements. Veuillez suivre toutes les instructions. Ne pas utiliser cet appareil avec de l’eau. Nettoyer à l’aide d’un linge sec. Un grand soin et une grande attention ont été portés aux matériaux choisis pour la production de ce produit. Un simple coup de chiffon sec et propre suffit pour enlever la poussière.
Élimination correcte des déchets d’équipements électriques et électroniques (directive DEEE) par l’utilisateur domestique au sein de l’UE. Ce symbole indique qu’au sein de l’UE, le produit ou les accessoires qui en sont porteurs ne doivent pas être jetés avec vos ordures ménagères.
AVERTISSEMENT IC RÉCLAMATIONS EN VERTU DE CETTE GARANTIE 1. L’appareil doit être retourné, si possible, au fournisseur d’origine dans son emballage d’origine ou à tout autre revendeur agréé de Monitor Audio. S’il est impossible de retourner l’appareil par porteur, il faut alors l’envoyer par port prépayé via un transporteur fiable. Si l’emballage d’origine n’est plus disponible, il est possible d’acheter un emballage de remplacement auprès de Monitor Audio. 2.
Déclaration de conformité CE FRANCAIS Nous, Monitor Audio Ltd. 24 Brook Road Rayleigh Essex SS6 7XJ Angleterre EN6100-3-3: 01.95 Comptabilité électromagnétique (EMC) – Partie 3 : Limites – Section 3 Limites de fluctuation de tension et oscillation des circuits d’alimentation basse tension pour les équipements actuellement limités à 16 ampères par phase.