Product Manual
Table Of Contents
- Front Controls
- User interaction inputs:
- User interaction outputs:
- Rear Connections
- Remote
- Set Up Operation
- oled display
- Volume Control
- Controls
- Process & Indicators
- Input Selection
- Track Functions
- Control
- Process & Indicators
- OLED Display Life Extension
- Process & Indicators
- BluOS System
- Control
- Set-Up
- BluOS Indicators
- Specifications
• ReceivingIRcodes:RGBLEDtoickerblue.
• Firmware upgrade: RGB LED to alternate between red and green.
SPECIFICATIONS
Power Amplier
Power output into 8 Ohm: 75 WRMS, Both Channels Driven THD+N <0.1%
Power output into 4 Ohm: 150 WRMS Single Channel Driven THD+N<0.1%
THD+N: <0.01% (1 kHz, 2 channels, 1 W @ 8 Ohms)
AmplierType:ClassAB
Gain: 29 dB
Channel Separation: > 90 dB @ 1 kHz & > 60 dB @ 10 kHz
Channel Matching: Better than 0.5 dB
Signal to Noise Ratio: 90 dB
Frequency Response: 10 Hz to 50 kHz (-3 dB)
Mains transformer rating: 250 VA
Pre-Amplier
Volume Channel Matching: Better than 0.25 dB
THD+N: 0.002% (1 kHz, 2 Vrms at Pre-Out)
Signal to Noise Ratio: 100 dB
RIAA: 47k/56p loading; gain settings suitable for 12 mV, 6 mV, 3 mV output cartridges
Bluetooth
Bluetooth:A2DPAudioprole
Bluetooth Codecs: SBC, aptX & AAC
Bluetooth Range: 15m (typ.)
Digital Inputs