Product Manual
Table Of Contents
- Front Controls
- User interaction inputs:
- User interaction outputs:
- Rear Connections
- Remote
- Set Up Operation
- oled display
- Volume Control
- Controls
- Process & Indicators
- Input Selection
- Track Functions
- Control
- Process & Indicators
- OLED Display Life Extension
- Process & Indicators
- BluOS System
- Control
- Set-Up
- BluOS Indicators
- Specifications
REAR CONNECTIONS
10 11 12
13
1 3
54 6
2
7 8 9
1. Speaker Inputs
Connect loudspeaker cables to these connections. Positive to positive and
negative to negative
2. Turntable Grounding Post
Used to ground the tone arm attached to the turntable
3. Phono Input
Connect the output from the turn table to the Attessa Streaming Amplier
4. Analogue 1 Input
Connect and analogue source
5. Analogue 2 Input (music sense)
Connect a second analogue input. WHAT IS MUSIC SENSE??
6. Pre-Out/ Subwoofer
Connect to a power amplier or subwoofer.
7. Coax/Optical SPDIF Inputs
Connect digital sources by eaither coaxial or optical connection
8. 12V Trigger Input/Output
Used to connect a 12v trigger input and output to control (output) or be controlled
(input) using the 12v trigger.
9. IR In
10. Ethernet/LAN
Connect to the LAN via wired connection
11. USB Input/Output
12. Service Port
For service only. Do not use.
13. AC Power Socket
Connect using the supplied mains cable. Fuse also located here in drawer.
IP
OP