User's Manual

 Click the drop down arrow to select the “Service Set ID” (SSID).
In the list should be your wireless network. Select your
network and enter the WEP Key (or other security type) key.
9. Click Apply. When you do, a warning pop up will be displayed,
click OK.
10. After clicking the OK button on the pop up, there will be no
other visible indication that the A100 is connected to the
network, other than a faint hiss and the A100 will change
modes to Auxiliary. This will be indicated by the LED turning
green.
11. Remember to return to the Available Wireless Networks list
on your computer and reselect your home Wireless Network.
You are now able to play music via wireless Airplay on your
network.
Via Mac
1. Turn the A100 on from stand by mode. The LED on the front
XJMMˍBTICMVFˌSTUMZJOQBUUFSOUIFOQBUUFSO
2. When it changes to Pattern 1, it is not connected to a wireless
network. Press and hold the AirstreamConnect/ AirPlay Direct
#VUUPO*UFNPO1BHFGPSBQQSPYJNBUFMZTFDPOETVOUJM
UIF-&%POUIFGSPOUˍBTIFTXIJUF1BUUFSO
3. On the computer, click on the Wireless network signal strength
indicator located in the bar at the top of the desktop.
4. In the list will be your network (probably ticked), and any
other wireless networks within range. One of them will be
AirstreamConnect****** (where the 6 *’s are the last 6 digits
of the A100’s unique Mac Address).
10
The Mac, must be wireless enabled with wireless
turned on.
HINT