User's Manual

Play Another Device Using the Digital or Analogue
Inputs
the following steps guide you through connecting a digital and
analogue auxiallary device and playing from it.
1. Insert the appropriate auxiliary cable (optical or analogue)
into the corresponding auxiliary input on the back of the A100
and the other end into the device you wish to play from.
2. turn the A100 on from stand by mode.
3. Press the appropriate auxiallary source button (analogue or
digital) on the A100 or the source button on the remote (item
5 on Page 3) until the Auxiliary appropriate source is selected.
the LEd on the front will be either Cyan (Digital Aux) or Green
(analogue Aux).
4. Press play on your device.
Firmware Update.
The A100 automatically searches for software updates whenever
it is turned on (providing there is a connection to the internet).
)PXFWFSUIFSFBSFPUIFSXBZTPGVQEBUJOHUIFˌSNXBSF5IFTF
BSFNBOVBMMZWJBUIFJOUFSOFUPSWJBB64#NFNPSZTUJDL%FUBJMT
of all methods are outlined below.
"VUPNBUJD/PUJˌDBUJPOPG'JSNXBSF6QEBUF
#ZEFGBVMUUIF"JTTFUVQUPJOGPSNZPVBˌSNXBSFVQEBUFJT
available automatically.
1. After the A100 has gone through the initial boot up procedure
BOEDPOOFDUFEUPUIFOFUXPSLCMVF-&%TUPQTˍBTIJOHUIF
-&% XJMM ˍBTI XIJUF TMPXMZ 1BUUFSO  JOEJDBUJOH UIBU BO
update is available.
2. Press and hold the stand by button until the LED on the front
comes back on and is illuminated orange.
3. The LED will now go through various colours changes
JOEJDBUJOHEJˋFSFOUTUBHFTPGUIFVQEBUFQSPDFTT
Blue - WiFi connection has been established.
Purple - Downloading the update (the time taken for this will
CFEFQFOEBOUPOJOUFSOFUTQFFEBOETJ[FPGVQEBUF
White 'MBTIJOHWFSZGBTU6QEBUJOHUIFˌSNXBSF
$ZBO - Updating the AirPlay module
Green4MPXˍBTI6QEBUFIBTCFFOTVDDFTTGVM
4. Once the update has been successfully completed, the A100
will go through the initial start up procedure as described on
page 4.
5. 8IFO UIF "1$ IBT CFFO DPOˌHVSFE ZPV NBZ UIFO OFFE UP
reconnect the A100 to the WiFi network as described on page 6.
14
*GUIF-&%JTTMPXMZˍBTIJOHSFEUIFVQEBUFIBTGBJMFE
Follow the steps for the Manual Update by internet or
64#UPFOTVSFJUTTVDDFTT
HINT
The remote will only change the volume when using
this input. You may also have to set the volume to
almost maximum on the device.
HINT