User's Manual

Freeing Your Music
Connecting to a Wi-Fi Network.
There are a couple of dierent ways you can register the S200
onto the Wi-Fi network. One method connects the iPhone, iPad
or iPod Touch directly to the S300 using the Apple supplied USB
lead, while the second uses the S200’s web portal via a PC, Mac
or iOS-device.
What is required?
To connect the S200 to a Wi-Fi network you will need to have the
following:
• A Wireless router.
• For Option 1, either an iPod Touch, iPhone or iPad and the
Apple supplied USB lead.
• For option 2, either a PC, Mac, iPod Touch, iPhone or iPad
connected wirelessly to the network. The PC/ Mac must be
connected wirelessly.
• Airstream S200
Option 1:
This is the easier of the two processes. It uses the wireless
network security information stored on the iOS device to connect
to and gain access to the network. All you need is a compatible
iPod Touch, iPhone or iPad running iOS5 or above. A list of
compatible devices for this method of connection can be found
below:
• iPad Air
• iPad 4
• iPad 3
• iPad 2
• iPad
• iPhone 5S
• iPhone 5
• iPhone 4S
• iPhone 4
• iPhone 3GS
• iPod Touch 4th Generation
• iPod Touch 3rd Generation
• iPod Touch 2nd GenerationTT
1. Turn on the S200 from standby.
2. Connect the iOS device via USB lead to the S200 (refer to
input 10 on page 3).
3. Press the Wi-Fi sharing button on the back of the S200
(button 7 on page 3).
4. As long as your iOS device is not locked a prompt will now
show on the screen asking you if you want to allow