Speaker User Manual

monitoraudio.co.uk12

Speciﬁcation

Ampliﬁer Output: 1000 Watts (RMS) 2000 Watts (Peak)

Frequency Response: 16Hz - 40/160Hz Variable

Crossover (Low Pass): 40Hz - 160Hz

Variable slope characteristic from 12 – 36dB/Octave

Sub-Sonic Filter (High Pass): 16 - 31Hz

EQ: 4 x Preset

1 x User Set

Equalisation: Graphic 9 Band Equaliser.

± 6dB in 0.5dB steps

Digital Volume Level: -80 – 0dB (2dB increments from -80 to -31dB; 1dB increments from -30 to 0dB)

Auto Sensing Line Level >5mV (RMS)

Input Requirements: Variable auto off 5 – 30 minutes in 5 minute intervals, user adjustable.

Variable Phase Control: 0, 45, 90, 135, 180, 225, 270, 315°

Internal Memory: 3 Independent Memory locations

Cabinet Speciﬁcation: Sealed Cabinet with 30mm M.D.F construction with critical internal bracing.

Sealed ampliﬁer compartment.

Ampliﬁer Classiﬁcation: Class- D ampliﬁer, with DSP control

Driver Compliment: 1 x 15” C-CAM

sub-woofer driver featuring triple suspension and 4” long throw voice

coil

Dimensions (H x W x D): 455 x 485 x 475mm

17 15/16 x 19 1/8 x 18 11/16”

All dimensions excluding grille and feet

Weight (unpacked) 50Kg (110lbs)

Mains Input Voltage:- 110 -120Vac, 220 - 240 Vac

(Factory Preset)

Fuse Type For countries with 220 – 240Vac supply use: 4A/250V 20MM UL/VDE

For countries with 110 – 120Vac supply use: 8A/250V 20MM UL/VDE

Trigger Input 3.5mm Jack input, +12Vdc = On State

Code System for All in One

Remote Controls NEC SH6122

C-CAM

is a registered trade mark of Monitor Audio Ltd

PLW15 manual.indd 12 30/04/2008 10:59:58