Instruction manual

5
© Monitor Audio 2005 RS Rev 5
Your Silver RS5
The new Silver RS5 is the smallest floor stander in the new Silver RS Series, and
the classically simple two-way layout ensures a beautifully clean appearance.
It’s slim cabinet design and resulting small footprint ensue versatility for any
environment. The RS5 fuses elegant, space efficient design with a powerful
sonic performance.
To remove the grille, carefully prise it away from each cabinet section at a time.
There are two sets of fixing points on this product; one above the drive unit, the
other below it. Refitting is the opposite of removing. Ensure it is correctly
orientated.
Tosafely fit theplinth and spikesplease refer to pages 12 and 13.
For information on wiring and system configurations, please refer to pages 13,
14 and 15.
Frequency
Response
(Cross over
Frequency)
Sensitivity
(1W@1m)
Nominal Impedance
(Ohms)
Power Handling
(W) RMS
Recommended
Amplifier power
output.
(W)RMS
40Hz –30KHz
(3.3KHz)
90dB 6 100 40 – 100
Drive Unit
Complement
Cabinet
Design
Product External
Dimensions.
cm (inch)
Plinth
Dimensions
(foot print)
cm (inch)
Weight
Kg (lb)
Finishes
1 x 6" C-CAM
®
Bass/ mid-
range.
1 x 25mm Gold
Dome C-CAM
®
tweeter.
Rear ported,
bass reflex
80H x 18.5W x 22D
(31 ½ " x 7 ¼ "
x 8
11
/
16
")
2.5H x 25.5W x
27D
(1" x 10" x 10
5
/
8
")
11.7Kg
(25.7lb)
Black Oak,
Rosenut, Walnut,
Natural Oak or
Cherry real wood
veneer. All fitted
with Black Grille