Owner's Manual

EO
Profiles
The Silver W-12 has 3 preset
EO
profiles. These are
EQ1
(Movies),
EQ2
(Music) and
E03
(Impact).
These profiles change the characteristics of the sound from the subwoofer. We highly
recommend experimenting with the different profiles to see which most suits your room,
tastes, environment, etc.
An
example of the different profiles
do
can be seen below:
Silver
W12 EQ
Profiles
:.
w>+k
:<:>>
•
Music -
Movie
-Impact
10
8
6
4
-2
-4
-6
-8
-10
20 30 40 50 60 70 80 90 100
Frequency
[Hz]
Additional
Information
for
Auto
On/
Off
and
Signal
Sensing
In
auto power mode, the method which wakes the system up takes priority until it
is
put
into standby, with trigger always taking priority over signal sensing.
Signal sense
is
around 1 mV sensitive on both the stereo and
LFE
inputs.
Some examples can be seen below:
1.
The system
is
woken up with signal. When the signal
is
stopped, a
20
minute timer
will
start counting down to zero. At zero, the system
will enter standby again.
If
a
signal
is
re-introduced within this
20
minute window, the system
will
reset and stop
the timer. The trigger line will
not have any effect.
2.
The system
is
woken up with the 12V trigger going high. The signal sense
will not
affect the state of the amplifier. The
amplifier will
automatically enter standby when
the 12V trigger line transitions low.
3.
The system
is
woken up with both signal present and the 12V trigger high. Trigger
will
take the priority, and signal sense
will not have any effect.
10