Manualshelf

Owner's Manual

ManualsBrandsMonitor Audio ManualsHome AudioWB5LCR
12
Pre-construction
Bracket
installations
steps:
1.
Decide location
of
speaker
(s).
2.
Clip fixing wings into place
in
convenient location around the polymer frame to suit the joists.
NOTE: Ensure the clips
of
the wings are fixed securely. There should be no gap around the outside
of the wing where it joins the bracket.
If
there
is
a gap, this
is
a sure sign one
of
the clips
is
not
in
correctly.
Alternative fixing arrangements are possible:
3.
Staple fixing wings to joists. Ensure the Monitor Audio and colour text on the wings face away from
you when fastening.
4.
Cable tie/ zip tie the speaker cable to the loop provided inside the moulding. This loop snaps off
when installing speaker.
5.
Fix
plaster board/ dry wall.
6.
Cut hole using INNER edges as cutting reference. DO NOT CUT TO THE OUTER EDGES OF
THE BRACKET.
© Monitor Audio 2011 .
rev1