User manual

22
23
English
English
Choose "Electricity" if the camera is
powered by a main electric supply. (using
a 12-volt DC adapter AD-12V, sold
separately). Main electric power supply
is recommended when use for security
purposes. It provides an instant trigger time
when a movement is detected. When the
power supply is used the lithium battery
pack or the AA batteries can remain safely
inside the camera and it is ideal in case of
a blackout. A 12-volt DC adapter that can
provide a minimum of 800 mA is required
(See "Options" for accessories).
Note: When using the electricity power, the
"Multi-shot" mode and the "Delay" between
photos are disabled as the camera triggers
instantly every time it detects motion. Also,
the printing of the temperature on each
picture is disabled.
Infrared:
(On/One LED/
Off)
Allow the user to choose how many LEDs
will be turned on.
On: Every LEDs work when taking photos
or videos at night.
One LED: Only a single LED works (see
figure). This option can be useful when
using an IR-Booster/Black LEDs IR-
Booster (sold separately, refer to the section
"Options").
Off: LEDs are deactivated so your night
photos or videos are pitch black.
TINY-3
LED for
infrared
sensor