User manual

16
17
English
English
How to properly install your camera
using the supplied installation strap:
(Recommanded installation height: about 3 feet).
SETTINGS
To define the options of the camera. To configure
the system in English, hold the button "" until
"Language" is highlighted. Press "OK", select "English" and
confirm your choice with "OK". The system will change all
the menus in English by itself.
Camera ID
Allow the user to name the camera
(maximum 8 characters)
Time Start /
Time Stop:
Allow the user to set the period of operation
of the camera. The start and stop time are
the hours during the camera is in action
and records pictures or videos. Example: if
the user selects a start time "7:00 am" and
a stop time "11:00 am", the camera will
only detect for that period of time and will
stay inactive for the remaining hours. Press
"OK" and use "" or "" to adjust the hour.
Press again "OK" to set the minutes. When
the time is properly set, press
"OK" once
more to go back.
For an activation of 24 hours, the same start
and stop time must be entered (example:
00:00 as start time and 00:00 as stop time.
These hours are the basic settings of your
camera.
Note: The hours can be recorded over a
12 or 24 hours period. Refer to "Setting"/
"Time format" (00:00 means midnight)