Specifications

Step 7:lnstall Flue Pipe B
Wall Thickness: 5-8 '/> inches
1. Slide the outer flange and the rubber packing onto
Flue pipe B. (Figure 11)
Rubber Packing
Outer Flange
. A
'/'A
Rubber Packing
Outer Flan
9
e
Fig. 11
Flue Pipe B
2. Spread caulking material on the inside of the rubber
packing if required. (Figure 12)
Rubber Packing
Fig. 12
3. It is imprtant to keep the "UP" mark on the rubber
packing at the top while screwing in Flue pipe B. Hold
the packing in place while screwing in Flue pipe B
until it is the tight. (Figure 13)
Rubber Packing
Fig. 13
Flue Pipe B
Wall Thickness: v« -5 inches
1. Set the Sleeve Nut t the Flue Pipe B and turn the
Sleeve Nut counterclockwise. Side the Outer Flange
and the Rubber Packing onto the Flue Pipe B.
(Figure 14)
Rubber Packing
\Rubber Packing
^ '• -n J^
(((( i ytr
V r-
Sleeve Nut
Outer Flange
Fig. 14
;
I L
IF
Sk
o
/
1
ut
/
F
;eve
er Flange
"lue Pipe B
Nut
2. Spread caulking material on the inside of the Rubber
Packing if required. (Figure 12)
3. It is imprtant to keep the "UP" mark on the Rubber
Packing at the top while screwing in the Flue Pipe B.
Hold the Rubber packing in place while screwing in
the Flue Pipe B until it is the tight. (Figure 13)
4. Turn the Sleeve Nut clockwise and tighten.
(Figure 15)
Rubber Packing
Flue Pipe A /
Outer F|ange
Sleeve Nut
Flue Pipe B
Fig. 15
12