Specifications

MONITOR HEATING SYSTEMS
Table of Contents
Section 1: Description
1-1 Specifications (M-2400)
1-2 Special Features (M-2400)
1 -3 Safety Features (M-2400)
1-4 Specifications (M-2200)
1-5 Special Features (M-2200)
1-6 Safety Features (M-2200)
1-7 Description
1-8 Spill Tray
1-9 Heater Cabinet
1-10 Combustion System
1-11 Combustion Chamber
1-12 Burner Pot
1-13 Combustion Ring Assembly
1-14 Flame Sensor
1-15 Igniter
1-16 Combustion Air System
1-17 Flue Pipe
1-18 Combustion Blower Motor (M-2400)
1-19 Heat Exchanger
1-20 Air Circulation Fan
Page 1~10
1-21 Air Pressure Switch
1-22 Fuel Delivery System
1-23 External Fuel Tank
1-24 Fusible Link Valve
1-25 Fuel Constant Level Valve
1-26 Solenoid Pump
1-27 Electrical System
1-28 Microprocessor
1-29 Temperature Sensor
1-30 Safety Mechanism
1-31 Cloth Covered Exhaust Pipe
1-32 Air Circulation Fan Guard
1-33 Fuse
1-34 Overheat Protector Switches (M-2400)
1-35 Revolution control of
combustion blower motor
1-36 Combustion Blower Motor (M-2200)
1-37 Overheat Protector Switches (M-2200)
Elements of combustion system (M-2400)
Elements of combustion system (M-2200)
Section 2: Installation
2-1 Introduction
2-2 Physical Placement of Heater
2-3 Drilling Requirements
2-4 Power Requirements
2-5 Fuel Tank Requirements
2-6 Temperature Sensor Wiring
Requirements
2-7 Building Codes
2-8 Un-packing
2-9 Heater Installation
Installation Classification (M-2400)
Page 11~27
Installation Classification (M-2200)
Applicable Wall Thickness of Flue Pipe
Flue Pipe Clearances
2-10 Installing an Extension Kit
2-11 Typical Monitor Lifter Pump Installations
2-12 Uses for the Elbow Adapter Kit
2-13 Fuel Tank Installation
2-14 Heater Installation
Typical fuel line connections
Back guard (M-2400)
Back guard (M-2200)
Section 3: Operation •
3-1 Introduction (M-2400)
3-2 Operating Specifications (M-2400)
3-3 Introduction (M-2200)
3-4 Operating Specifications (M-2200)
3-5 Operating Controls and Indicators
3-6 Pre-operation Check List
3-7 Operation
3-8 Manual Heater Operation
3-9 Automatic Heater Operation
Page 28~38
3-10 Programming the weekly timer
for automatic heater operation
3-11 Heat Sensor
3-12 Monitor Shutdown
3-13 Out of Fuel
3-14 Recovery from a Power Failure
3-15 Recovery from Overheat Condition
3-16 Recovery from Blown Fuse
3-17 Operation Control system
M-2400/2200 Operation timing chart