Specifications

MONITOR HEATING SYSTEMS
Section 2: Installation
2-10 INSTALLING AN EXTENSION KIT
Installing an Extension Kit requires the construction
of an air line and the exhaust line. The air line is
connected between the Air Supply Elbow at the rear
of the heater and the air inlet port on the Flue Pipe.
Similarly, the exhaust line is connected between the
joint pipe at the rear of the heater, and the exhaust
port on the Flue Pipe.
IMPORTANT: The PVC air line is longer than the
exhaust line and may need to be cut
to size. Be sure, however, to thor-
oughly deburr all rough edges.
10
Part No.:
8002 Long Extension Kit 38 to 73 inches
8003 Medium Extension Kit 20 ^A, to 38 inches
8004 Short Extension Kit 11 >£ to 20 >J inches
8212 Extra Short Extension Kit 7^ to 1l)i inches
Figure 2-10 COMPONENTS OF EXTENSION KIT
ITEM? DESCRIPTION
1 PIPE, Air supply
2 JOINT, Air line
3 ELBOW 90 Air line
4 LEG, Wall-standoff
5 PIPE CLAMP, Top
ITEM;
6
7
8
9
10
DESCRIPTION
PIPE CLAMP, Bottom
SCREW. Legs, mounting
SCREW, Pipe Clamp
BOND. Adhesive
EXHAUST INSULATING SOCK
18