Specifications

SYMPTOM
CHECK1
_
duced when
set "High."
noise is made
soon after
igniting.
Chamber
Window gets
smoky after
running.
placed hori-
zontally level?
Is flue pipe too
long, or extension
kit has too many
bends.
(See Section 2,
INSTALL)
Is ignition
time too long?
(Usually 0.5-1
min.)
kerosene?
Is Heater
mounted
horizontally?
Is external
fuel tank too
tow? (See
Section2,
INSTALL.)
Install Air
Damper and
Blower Damper
if needed.
(See Symptom
*5 above.)
Is there an
obstruction in
the Combustion
Air intake
System?
RESULT
-1 Normal.
-I Abnormal.
_|
- Abnormal.
^- Abnormal.
I
CHECKS
RESULT CHECKS RESULT CHECK4 RESULT CHECKS RESULT
REASON
CORRECTIVE MEASURE
Does
Combustion
Fan
work property?
Checlcfor
obstructions
(such as wasps
nests) in
exhaust or air
supply piping.
Is air damper
installed
according to
specifications?
•H
N
°™
ai
- - ?^^
e
r N-* - "jrp.wi -H
Yes
- - aSSsss* T
Y
~ —
according to accoroiig to
•specifications?' 'specifications''
»
1 1
L
L-l Normal. 1— See Symptom #5 above.
Does flame
extend to
whole area
of burner?
v 1 1 it " -r
1 1 property? 1 ___| I
L
Fuel solenoid pump malfunctioning.
(Makes a loud knocking noise.)
intake or exhaust line dogged, t" '~
Combustion fan failed.
Clogged air supply or exhaust piping.
Clean pump strainer
Replace solenoid pump
Clean needed vatve and seat of
constant Level vatve
Install Air Damper and Blower
Damper according to
specifications.
Process jumper wire'CJ'on P.W.
B. according to 'specifications'
Clean out air and exhaust ducts.
Replace Combustion Blower
Assembly
Remove obstructions.
Not as specified. 1 Correct as specified.
Too much air flow.
Igniter does not get hot evenly
around igniter.
Combustion Ring is installed
improperly.
Combustion Ring is broken or
wrapped.
*- ... 1 NO — J Air leaks from Igniter Cover.
1 Lll 1 to High and Low 5-6 times. _ 1
— Rame does not extend. —
Supplies only small amount of
fuel due to dust or bubbles in
Fuel Delivery parts.
Pump strainer is clogged.
Not as specified.
Mount Air Damper
if needed.
Replace Igniter
-
Install Combustion Ring properly.
Burner doth has come ungfued-
reglue or replace burner doth and
regtue.
Replace gasket; correctly install
cover.
nstruct customer about filter and
reset lever.
Clean pump strainer.
Correct as specified.