Manualshelf

Data Sheet

ManualsBrandsMonk Makes ManualsMicrocontroller AccessoriesMonk Makes Servo Controller Kit for micro:bit
12345678910
4. Connect the Battery Box
The battery box has two leads coming out of it that need to be connected to the
screw terminals on the Servo for micro:bit board.
Using a screwdriver, unscrew both of the terminals in the terminal block and then
insert the end of the red lead into the screw terminal marked with a + and do up the
screw of the terminal. Do the same with the black lead in the terminal marked with a
-.
You can now put the batteries in the battery holder, making sure you get them the
right way around to match the drawings inside the battery box. You may find that
Page 6